Skip to content

Free Shipping on Orders $50+ | CFIA-Licensed Facility | Ships from Brantford, ON

Next: Lion's Mane Coffee sample
Loading…

Mushroom grow-kit help

How to Mist a Mushroom Grow Kit

For Nature Lion kits, gently mist underneath the X flaps 2–3 times a day until mushrooms sprout. Lion’s Mane also needs its humidity tent.

Nature Lion Lion’s Mane mushroom grow-kit box
The Lion’s Mane kit includes a humidity tent and spray bottle.

01

Before mushrooms appear

Use the spray bottle included with your kit, filled with clean water. The aim is a damp growing surface, not a soaked box.

  1. Lift the flaps gently

    Lift the plastic flaps of the X just enough to reach the exposed block.

  2. Mist underneath

    Spray a gentle mist across the exposed surface. Stop when it is damp; don’t leave water pooling in the cut.

  3. Lay the flaps back down

    The flaps help hold moisture at the opening. Keep them attached.

  4. Repeat 2–3 times each day

    Check in the morning and evening, with a third check during the day. If it dries very quickly, check for direct sun, a heater or an air vent.

02

Lion’s Mane only: use the included humidity tent

Lion’s Mane is the only Nature Lion kit supplied with a humidity tent. The tent is a loose cover that helps keep the air around the mushrooms moist.

  1. Make a few air openings

    Cut a few slits in the tent before putting it over the kit.

  2. Drape it loosely over the box

    Leave room around the growing opening. Don’t seal the tent around the bottom or press it against the mushrooms.

  3. Mist the inside 2–3 times a day

    Mist the inside walls of the tent to keep them moist, then put it back over the kit. Continue the gentle care of the block’s opening while you wait for mushrooms. Avoid soaking the mushrooms themselves.

  4. Once mushrooms grow, give them a daily air break

    Take the tent off for 1–2 hours once a day, then replace it. Keep the kit away from a drying fan or heater during the break.

03

Once tiny mushrooms appear

Those little bumps or baby caps are called pins. Stop scraping and leave them attached. Let the mushrooms push through the opening; don’t force the plastic flaps over them or keep lifting flaps that catch on the cluster.

Keep checking 2–3 times a day. Gently mist any exposed block surface that needs moisture without soaking the developing mushrooms. Once mushrooms start growing, check their harvest cues every day.

Small dark oyster mushroom caps emerging together from the opening in a Nature Lion kit
Baby oyster mushrooms are called pins. Leave them attached and let them grow.

04

Too dry or too wet?

A surface that looks dry again soon after misting may need a gentler location away from moving hot or cold air. Move it away from the draft and continue your normal checks.

If water sits in the opening or keeps running down the box, use less water per session. Don’t try to make up for a missed misting with a long soak. Contact us if baby mushrooms look shrivelled or stop changing.

05

Not sure? Show us your kit

Email info@naturelion.ca with a clear photo of the whole kit and a close-up of the opening. Tell us the mushroom variety, when you opened it, where it sits and how often you mist. Include your order number if you have it. We can help you choose the next step.

06

More help with your grow

For more background, read the related guides below. Follow the Nature Lion instructions above for your boxed kit.

Keep a photo diary with Dr. MycoTek

Want to remember how your mushrooms grew?

A few photos on your phone are a good start. If you’d like to keep dates and photos together, you can use Dr. MycoTek. It’s optional—everything you need to follow this guide is on this page.

Take or upload a grow photo

Continue exploring

Nature Lion opening and care instructions apply to our boxed kits. For another maker’s kit, follow the instructions supplied with that product. Growth photos show individual examples; timing and results vary.